|
inRAx
Protocol interface modules for Allen-Bradley control platforms PLC-5, SLC 500, ControlLogix Flex I/O, FLEXLogix, CompactLogix, and SCANport/Drives. Solutions include protocol interface modules, in-rack PCs, and flow computers
You need to be logged in to get access to the forums. You can do so here
|
Message
|
Topic
|
Replies
|
|
Thank you for your observations on the ladder logic.
I have fixed this ladder to address these 2 issues. This should be posted to our website within a couple of days. I have also requested that the manual be updated to include these changes.
It sounds like you currently have the ladder logic working, but if you would like a copy of...
|
MVI56-GSC Example - Reiter @ 10/08/2004 8:37 am
Reply: RE:MVI56-GSC Example - esyme @ 10/08/2004 4:26 pm
|
1
|
|
You use the tag, MCM.PortX.CmdErrPtr (where X is the Master Port), to point the Command Error Table into an unused area of your ReadData array so you can see the status of each command. For instance, in your application, if MCM.ModDef.ReadStartReg=600 and you are not already using MCM.ReadData[500] through [599] for data, you could get the...
|
MVI56-MCM - frosty @ 09/08/2004 7:46 pm
Reply: RE:MVI56-MCM - jsanders @ 28/06/2005 3:33 am
|
3
|
|
The recommended way for using ADM library files for establishing a tcp/ip connection would be to use the ADM_init_socket to name the function, then use the ADM_receive_socket function. This method is used in the sample program for the ADMNET module. The ADM_receive_socket funcition will call the appropriate functions to open the socke and...
|
MVI56-ADMNET ADM_tcp_open command - gblanton @ 29/07/2004 3:25 pm
Reply: RE:MVI56-ADMNET ADM_tcp_open command - esyme @ 06/08/2004 2:08 pm
|
1
|
|
The AutoPoll Feature is going to pull using command 3 the 4 dynamic variables in your device. If you need an specific variable like the totalizer, you need to go online with your micromotion using a HART handheld, and then specify in what dynamic variable do you want to have your totalizer
|
MVI46-hart - jtrosdahl @ 27/07/2004 12:58 am
Reply: RE:MVI46-hart - izuloaga @ 26/01/2005 10:40 am
|
2
|
|
The MVI56-MCM is used for local chassis installations.
The MVI56-MCMR was designed for remote chassis installation.
|
serial Modbus to Controllogix - @ 14/07/2004 3:58 pm
Reply: modbus for Controllogix - @ 16/07/2004 8:54 am
|
1
|
|
Works very well for us.
|
MVI46-DFNT works great - CH @ 14/07/2004 11:48 am
Reply: Re:MVI46-DFNT - @ 14/07/2004 12:50 pm
|
1
|
|
