MVI46-GSC ERROR CONFIGURATION ON SLOT 6
You need to be logged in to get access to the forums. You can do so here
|
delt
|
Tuesday 15 August 2006 7:09:00 am |
|
|
MVI46-GSC ERROR CONFIGURATION ON SLOT 6
am try to Implement an MVI46-SCG in a Slot 6 of one Rack A10 but I can't read/write any data.
I supose the M0/M1 file that i need to use are M0:6.XX for Output Data and M1:6.XXX for input Data.
but RsLogix Display Error : Unconfigured 'M' File address referenced (#M0:6.0)
I think the problem is because in the Advance IO configuration M0 lenght and M1 Lenght Fields are 0 in both cases.
How can I do for modify this fields as shown on the manual :
M0 length: 400 and M1 Lenght: 300 ?
because when I select the module (OTHER module) from the List and the fields M0 and M1 lenghts are not permisibles to modify
My Rack A10 is configured as follow:
0-1747-L522B 5/05
1-1747-SDN
2-1746-IB32
3-1746-IB32
4-1746-IB32
5-1746-OB32
6-OTHER I/0 MODULE-ID Code = 12835
7-1746-OB16
8-1746-OB16
9-1746-OB16
I appreciate your help
|
|
jsanders
|
Tuesday 15 August 2006 3:04:32 pm |
|
|
RE:MVI46-GSC ERROR CONFIGURATION ON SLOT 6
If you are using version 5.xx of RSLogix500, it has a known bug that prevents you from changing the M1 and M0 file sizes. The solution is to upgrade to a newer version of RSLogix500. A work-around is available from our Knowledge Base at the following link:
http://www.oldi.com/primattach/PA..._2243-Version%205_5%20Workaround.doc
|
