Unable to establish a connection from MVI56-GEC
You need to be logged in to get access to the forums. You can do so here
|
robert_builder
|
Monday 13 February 2006 12:28:55 am |
|
|
Unable to establish a connection from MVI56-GEC
hi, I'm having a problem...:<
I'm able to setup the BIOS from MVI56-GEC, however, I'm not able to do the configuration/debug menu. it keeps showing me that "Waiting for connection for processor" when I'm trying to connect to MVI56-GEC module.
How can I fix this problem??
Thanks.....!!
Robert
|
|
jsanders
|
Monday 15 May 2006 3:21:31 pm |
|
|
RE:Unable to establish a connection from MVI56-GEC
The description of what you are seeing is typical when the module's Setup Jumper is installed, shorting both pins. This jumper need be installed only when upgrading module firmware under the supervision or direction of ProSoft Technical Support Engineers. For all other module operations, normal operation and configuration downloads, the Setup Jumper MUST NOT be installed.
Also, you must have our sample ladder logic loaded into your CLX CPU or have it included into your existing program; and the CPU must be in RUN mode. This will allow the module to open a backplane connection to the processor and clear the "Waiting for Connection" message.
|
