4201 web dfm module using pass through
You need to be logged in to get access to the forums. You can do so here
|
trevor
|
Saturday 11 June 2005 2:08:14 pm |
|
|
4201 web dfm module using pass through
I have a 4201 module connected Port 0 to a AB Micrologix 1200 running DF1 and I have a Panelview 600 connected to the debug port on DF1 pass through. Speed on both ports is 9600.
The screen keeps loosing communications and going off line. If I connect the screen directly to the PLC the comms are fine.
The 4201 is reading 10 intergers from the PLC for a simple WEB page.
What can I change in the 4201 config file to improve the comms.
regards
|
|
jsanders
|
Monday 13 June 2005 12:12:33 am |
|
|
RE:4201 web dfm module using pass through
Without seeing exactly how you have the module configured right now, it's hard to make reasonable suggestions for changes. For specific advice on how to modifiy your configuration for your application, please attach your existing configuration file to an e-mail and send your request to support@prosoft-technology.com.
|
