ProSoft PTQ-PDPMV1
You need to be logged in to get access to the forums. You can do so here
|
aszodpal
|
Wednesday 12 January 2005 3:51:10 am |
|
|
ProSoft PTQ-PDPMV1
When the Concept or at least Unity HSBY support will be available from the module?
Or the module is already fitted for further HSBY mode?
|
|
|
Monday 17 January 2005 12:57:50 pm |
|
|
RE:ProSoft PTQ-PDPMV1
Hot Stanby support for the PTQ-PDPMV1 module using Concept programming software is schduled for release later this year. No specific date has yet been set.
Currently, none of ProSoft's PTQ modules support Unity processors. This support is also being considered for later this year.
|
|
jsanders
|
Tuesday 23 May 2006 4:23:01 pm |
|
|
RE:ProSoft PTQ-PDPMV1
ProSoft PTQ modules now support Unity Pro programming software. The Hot Standby support is still in the works.
|
|
Robert Willis
|
Saturday 13 January 2007 8:37:24 am |
|
|
RE:ProSoft PTQ-PDPMV1
The custom installation of the latest version 2.04.22.0008 does not work correctly. After installing the program complains about not being able to find the module.mtf file on the C drive when the custom install placed the program on the E drive. In searching the computer it appears that the install placed files on both the C and E drive in the following locations: C:\Program Files\ProSoft Technology Inc\PCB and E:\Program Files\ProSoft Technology Inc\PCB. I unistalled the software and re-installe to the C drive and evrything works fine although the customer prefers that all applicaiton software be installed on the E drive.
|
|
jsanders
|
Monday 29 January 2007 9:48:03 am |
|
|
RE:ProSoft PTQ-PDPMV1
Thank you for bringing this to our attention. I will pass your information along to the Development Team responsible for the ProSoft Configuration Builder program so that can correct this in furture releases. We apologize for any inconvenience this may cause.
|
