RLX-IH repeater won't connect after power cycles
You need to be logged in to get access to the forums. You can do so here
|
bro250
|
Tuesday 31 May 2005 5:00:13 am |
|
|
RLX-IH repeater won't connect after power cycles
Hi,
I have two RLX-IH units, one set up as a master and the other as a repeater. I have MAC filtering enabled so that the radios can only talk to each other. Everything works fine except when power cycles on the repeater. The repeater never seems to connect again. If you cycle power on the master the units will eventually connect. Is there a setting that will fix this?
Thanks
|
|
bro250
|
Thursday 02 June 2005 12:35:31 am |
|
|
RE:RLX-IH repeater won't connect after power cycles
Disabling the MAC Filter took care of the problem. Not sure if that is right or not but it works??
|
|
CH
|
Sunday 19 June 2005 11:19:03 pm |
|
|
RE:RLX-IH repeater won't connect after power cycles
This sounds like a firmware related issue. I suggest calling our support department at 661-716-5100, 8-5 PST.
CH
|
|
jschliem
|
Friday 24 June 2005 4:36:47 am |
|
|
RE:RLX-IH repeater won't connect after power cycles
There is an issue when using the MAC ID filter with the RLX-IH radios that causes the Repeater to lose link. There is a new version of software that fixes this problem. It is currently being validated and it will be released in the near future. For now, the workaround is to turn off the MAC ID filter.
|
